HOME >> PRODUCTS >> ACCESSORIES >> FOLDING BUTT ASSEMBLING INST. - 12 BORE PUMP ACTION GUN

Arms Auction

  -New Registration
  -Forgot Password
  -Who Can Register
  -Why To Register
  -Check Auctions

Auction Help
  -How It Works
  -How To Buy
  -How To Sell
  -Is It Safe
  -FAQ's
  -Terms & Conditions
  -Feedback System
  -Privacy Policy
Directory
  -Retailers
  -Wholesalers
  -Repair Workshops
  -Gun Manufacturers
  -Air Gun Suppliers
  -Accessories Suppliers
  -Swords Suppliers
  -Get Listed
Laws
  -Arms Act 1959
  -Arms Rules 1962
  -Arm's FAQ's
  -Arms Forms
  -Contact Lawyer
Products
  -Accessories
  -Spares
  -Gunsmithy Supplies
  -Arms Books
Useful Info
  -Proof Marks
  -Tips For Buying DBBL
  -Top Gun Sites
  -Site Map
Contact Info
  -About Us
  -Contact Form
  -E-mail
Indian Ordinance Factory Products
  -.32 Revolver
  -.32 Pistol
  -.315 Rifle
  -.22 Rifle
  -.22 Revolver
  -.12 P.A.Gun
  - IOF Board
 


Folding Stock for 12 Bore IOF Pump Action

Assembling Instructions:

  1. The factory fitted stock is removed. Stock bolt (as supplied) is tightened in the threaded aperture of the receiver of the Pump Action Shotgun.

  2. Fibre pistol grip is enclosed over the Stock bolt. Pistol grip locking bolt tightens the Pistol grip through the Locking lug to the receiver of the Shotgun as shown in the exploded diagram.

    Fibre Pistol Grip is now tightened with the receiver and it can even be used independently of the folding attachment.

  3. To use the folding attachment, Mount is secured to the Pistol grip by means of a Mount locking bolt as shown.

  4. Arm locking spring is inserted in the housing under the Elongated arm, the spring is then compressed and both the Elongated arm and the spring are inserted inside the Mount such that the holes in the Mount and the Elongated arm are aligned straight.

  5. The Pivoting pin is then inserted in the holes from the top of the Mount.

  6. Pivot pin holding screw is tightened in the threaded aperture of the Elongated arm in such a manner that it locks with the groove of the Pivoting Pin.

Exploded Isometric view of the Folding Stock


The Folding Stock is now ready for use.

Working of the Folding Stock:

 In order to use the Folding stock in the folded position the Pivoting Pin is pressed from the top of the Mount such that the Elongated arm detaches from the Mount. It is then manually pivoted in a horizontal plane to the side of the shotgun till the key in the Elongated arm  locks with the slot in the Mount. To use the shotgun with the stock in the extended position, the Elongated arm is pivoted again by pressing the pivoting pin.

 

 

HOME



Gunaccessory.Com, Cooper Road, Amritsar - 143001 (INDIA)
Tel: +91-183-309 7052 / 222 5316, Fax: +91-183-222 3405

Web Designing & Development

© Gunaccessory.Com  All Rights Reserved.